2000 Yamaha YZF600

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Handlebar fouling on the fuel tank or bodywork on full lock Traps left hand against the tank (2.1.4 (b))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

side stand cut out switch inop

Front Shock absorber has a serious fluid leak fork seals (5.3.2 (b))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

side stand cut out switch inop

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Side stand bolt excessively worn

oil on rear tyre

Rear Drive chain excessively loose (6.2.1d)

rear tyre valve deteriorated

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Headlamp aim too low (1.6)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))