2000 Gilera Runner

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Shock absorber has a serious fluid leak Fork Seals Leaking (5.3.2 (b))

Fuel tank leaking Major Fuel Leak Under Vehicle (6.1.3 (b) (i))

Headlamp aim not tested covered (4.1.2 (b))

Headlamp light intensity severely reduced Covered (4.1.4 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Stop lamp not working (4.3.1 (a) (ii))

Wheel alignment incorrect which adversely affects the handling rear hub loose (2.4 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Wheel hub worn to the extent that wheel security is adversely affected rear wheel loose, excessive play (5.2.1 (b) (ii)) DANGEROUS

Exhaust slightly loose mounting bolt missing (6.1.2 (a))

Front Head Light Cover loose, not going to fall off

Horn not working properly (7.7 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front wheel bearings have slight free play (2.3.5b)

Exhaust is leaking and excessively noisey (7.1.1b)

Handlebar mounting clamp loose (2.1.1a)

Headlamp aim too high (1.6)

Nearside Indicator tell tale not functioning (1.5.2)

Front wheel bearings have slight free play (2.3.5b)

Exhaust noisy (7.1.2)

Rear Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Handlebar mounting clamp bolt loose (2.1.1a)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp aim too high (1.6)

Nearside Front suspension assembly component loose (2.3.1)

Rear Brake hose leaking fluid (3.2.B4)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Hydraulic brake control creeps under load. (3.1.4a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Rear suspension has a fracture of a load bearing member or its supporting structure. (2.4.A.2d)

Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. (2.4.A.2d)

Rear Registration plate characters laid out in an incorrect format (6.3.4f)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bush has excessive free play (2.4.A2a(i))

Front Roller brake test indicates a slightly juddering brake (3.3.A1b)