MOT Status
ValidMileage
202,455 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp light intensity severely reduced (4.1.4 (a))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i))
Nearside Front Tyre has ply or cords exposed perished (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed perished (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed perished (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Lower ball joint dust cover cracking
Nearside Power steering component has slight seepage from a component steering rack (2.1.5 (a))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting repair covered in underseal sill end panel covered in seam sealer (5.3.6 (a) (i))
Nearside Rear chassis to wheel arch liner corroded
Nearside track rod end dust cover cracking
Offside Front Lower ball joint dust cover cover cracking
Offside Oil leak, but not excessive oil cooler pipe (8.4.1 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting repair covered in underseal inner sill covered in seam sealer (5.3.6 (a) (i))
Offside Rear chassis to wheel arch liner corroded
Oil leak, but not excessive rocker cover gasket (8.4.1 (a) (i))
all brake discs rusty
Front Cross-member corroded
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive Outer sill (7.1.1 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Floor/inner sils,both sides (5.3.6 (a) (i))
Fuel cap/sealing device missing (6.1.3 (b) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Cross-member corroded
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive Outer sill (7.1.1 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Floor/inner sils,both sides (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre slightly damaged/cracking or perishing nearside and offside front (5.2.3 (d) (ii))
front cross member corroded
nearside front and offside front inner sills corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Seat belt buckle damaged (7.1.2 (d))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Registration plate inscription illegible delamination (0.1 (b))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Nail in tyre ()
Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Tyre slightly damaged/cracking or perishing nearside and offside front (5.2.3 (d) (ii))
front cross member corroded
nearside front and offside front inner sills corroded
Covers fitted upper and lower
Front Headlamps deteriorating
Nearside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))
Offside Rear Inner wheel arch corroded and deteriorating "ADVISE REPAIR"
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Covers fitted upper and lower
Front Headlamps deteriorating
Nearside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))
Offside Rear Inner wheel arch corroded and deteriorating "ADVISE REPAIR"
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Brake pipe leaking (3.6.A.1)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Additional position light not working
both front/rear brake pads starting to wear thin,ok at test
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
both front/rear brake pads starting to wear thin,ok at test
nearside rear lamp lens holed & temp repair with lens tape
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
nearside rear lamp lens holed & temp repair with lens tape
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Oil leak
Battery insecure (1.9.1)
Exhaust system not adequately supported (7.1.1)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Oil leak
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
offside & nearside headlamps poor condition of lenses
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
offside & nearside headlamps poor condition of lenses
Battery insecure
Child seat fitted not allowing full inspection of adult belt
Headlamp masks/converters fitted
Oil leak
Rear brake pads appear low, unable to fully assess. Advise brake check.
Battery insecure
Child seat fitted not allowing full inspection of adult belt
Headlamp masks/converters fitted
Oil leak
Rear brake pads appear low, unable to fully assess. Advise brake check.
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W533 WTA is a 2000 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2000 Mazda Bongo models, the average MOT pass rate is 69.4% with a typical mileage of 122,442 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying W533 WTA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 26 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W533 WTA?
You can check the full history of W533 WTA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W533 WTA registered?
W533 WTA is a 2000 Mazda Bongo, first registered on 31 December 2000.
Is W533 WTA safe to buy?
The MOT history for W533 WTA shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W533 WTA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W533 WTA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.