2000 Rover 25

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Lower Suspension arm insecurely attached split pin missing from ball joint (5.3.3 (a) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Stop lamp(s) with a multiple light source up to 1/2 not functioning high level brake light (4.3.1 (a) (i))

battery insecure

nearside front wheel has slight bind

slight leak from nearside of steering rack

Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive Nearside and Offside outer sills (7.1.1 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside and Offside outer sills (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Central exhaust system deteriorated in condition

Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive Nearside and Offside outer sills (7.1.1 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside and Offside outer sills (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)

Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Battery insecure (1.9.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)

Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Oil leak

genral under body corrosion

N/S & O/S wiper blades deteriorating . N/S front tyre sidewall has a cut not deep enough to expose ply