2000 Yamaha YZF600

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Horn not working (7.7 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Registration plate insecure (0.1 (a))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Road spring corroded (5.3.1 (b) (i))

Central Rear swing arm corroded

Offside Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Throttle operating incorrectly Sticking on full throttle (6.2.7 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear swing arm corroded

Front Brake excessively binding (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Horn not working (7.7 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Central Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Central Rear Registration plate delaminated (6.3.1.d)

Offside Front Brake lever has inadequate reserve travel (3.1.3b)

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Offside Front Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Indicator tell tale not functioning (1.5.2)

Rear Drive chain excessively loose (6.2.1d)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Clutch lever bent (6.2.1g)

Front Floor brake test indicates a slightly juddering brake (3.3C2d.)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Offside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear reflector on motorcycle missing (1.4.1)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)