2000 Fiat Punto

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Front Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Stop lamp not working (1.2.1b)

Gearbox mounting defective ()

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear coil spring corroded (2.4.C.1b)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Oil leak ()

front exhaust flexi starting to split

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

wipers parking erratic

Offside Rear position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

wipers parking erratic

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear coil springs corroded

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear coil springs corroded

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Inner Front Brake pad(s) insecure (3.5.1g)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Front Brake pad(s) insecure (3.5.1g)

Offside Side repeater not working (1.4.A.2c)

Service brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Centre of offside front floor is holed where a fuel pipe bracket mounting pin has been ripped out. Pipes still secure, not within 30cm of structural mounting.

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Offside front windscreen wiper rattling on arm fixing.

Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

small split n/s/f wiper blade

Parking brake: efficiency below requirements (3.7.B.7)

Brake pedal spongy (3.3.B.1b)

Offside Front Brake hose twisted (3.6.B.4c)