2000 Yamaha YZF600

Front Tyre worn close to the legal limit 2mm (5.2.3 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit 2mm (5.2.3 (e))

Offside Handlebar retaining device missing (2.2.1 (b) (i))

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim too high (1.6)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Drive chain sprocket slightly worn (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

wiring loose under yoke

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Front Plate brake test indicates a sticking brake (3.3.B1a)

Plate brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.B2b)

Rear Brake disc(s) slightly pitted (3.2.A1l)

suspect clutch

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Roller brake test indicates a sticking brake (3.3.A1a)