2000 Suzuki Swift

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Fuel pipe/s corroded

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

front crossmember holed and corroded

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust system not adequately supported (7.1.1) DANGEROUS

Front lower crossmember holed.

Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel pipe/s corroded

front crosmember is holed and corroded

nsf wishbone is heavly corroded

rear suspension arms are heavly corroded

Brake load sensing valve seized (3.6.E.3)

Front registration plate deteriorated (6.3.1d)

Nearside Front coil spring fractured (2.4.C.1a)

Offside Front Suspension arm worn and seriously weakened (2.4.G.1)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Brake pipe inadequately clipped (3.6.B.1)

Service brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel pipe/s corroded

all brake flexi feruls are corroded

front crosmember is holed and corroded

front wishbone bushes are split

nearside sill is holed

nsf wishbone is heavly corroded

rear suspension arms are heavly corroded

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

clutch pedal rubber deteriorated

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Offside Front Additional braking device component(s) insecure (3.6.I.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

clutch pedal rubber deteriorated

nearside rear tyre cracked/perished

offside rear tyre cracked/perished

both outer cv boots deteriorated

rear brake pipes corroded

rear tyres cracked and perished and close to legal min

Offside Front coil spring fractured (2.4.C.1a)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both outer cv boots deteriorated

rear brake pipes corroded

rear tyres cracked and perished and close to legal min

Both rear tyres badly perished and in poor condition

Fuel pipe/s corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak from gearbox drain plug

Vehicle failed Basic Emissions Test ,passed full cat test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front brake caliper securing device loose (3.5.1j) DANGEROUS

Both rear tyres badly perished and in poor condition

Fuel pipe/s corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak from gearbox drain plug

Vehicle failed Basic Emissions Test ,passed full cat test

Brake pipe excessively corroded (3.6.B.2c)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pipe slightly corroded (3.6.B.2c)

both rear tyres starting to crack