2000 Honda Accord

Central Front Bonnet cannot be secured in the closed position held by second catch only requires immediate attention (3.1 (b) (i))

Emissions not tested due to filling machine with water may incur damage (8.2.1.2 (d))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in white under inner wheel arch (6.1.1 (c) (i))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Upper Suspension arm ball joint likely to become detached dangerous (5.3.4 (a) (ii)) DANGEROUS

Offside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) DANGEROUS

Central Front Registration plate deteriorated but not likely to be misread damaged at the bottom (0.1 (b))

Central exhaust blowing slightly

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Side repeater incorrect colour (4.4.3 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

nearside front tyre inner edge scrubbed

Braking system leaking (3.6.A.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

nearside front tyre inner edge scrubbed

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Direction indicators incorrect colour (1.4.A.2f)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Rear registration plate delaminated (6.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)