2000 Mercedes-benz Vito

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

injector blowing

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Brake pipe inadequately supported (3.6.B.1)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear coil spring incomplete (2.4.C.1a)

Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Seat belt damaged but webbing not significantly weakened (5.2.2a)

n/s outer sill corroded

o/s outer sill corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

clutch pedal rubber missing

off side inner c.v boot split

both rear tyres slightly worn on the inner edges

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Steering rack gaiter split (2.2.D.2d)

Brake pipe slightly corroded (3.6.B.2c)

both rear tyres slightly worn on the inner edges

Brake pipe slightly corroded (3.6.B.2c)

front discs slightly worn

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside rear brake juddering slightly (3.7.A.5b)

Offside rear brake juddering slightly (3.7.A.5b)

Centre Rear Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

Centre Rear Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

front brake application uneven (3.7.B.2)