2000 Nissan 200 SX

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Nearside Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

under body is covered in under sealer

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under side of vehicle heavily under sealed.

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Tie bar/rod attachment bracket/mounting insecure (2.4.G.1)

Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Front Tie bar/rod attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

archs corroded

floors corroded

front top mount percribed area

offside rear brake binding

sills corroded

Front front brake juddering severely (3.7.A.2b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

archs corroded

floors corroded

front top mount percribed area

offside rear brake binding

sills corroded

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

nearside and offside rear inner sills corroded

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Ball joint has excessive play (2.2.B.1f)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

nearside and offside rear inner sills corroded

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

both rear brake discs corroded

rear brake pads worn low

Oil leak