2001 Fiat Hymer

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Brake pipe corroded, covered in grease or other material to middle brake (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material to middle brake (1.1.11 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Front Brake pipe excessively corroded front to rear (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material to middle brake (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material to middle brake (1.1.11 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Outline marker lamp not working (4.2.1 (a) (ii))

Rear Exhaust system insecure multiple rubbers broken (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Lower Suspension arm ball joint excessively worn ball joint shank loose in arm (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear fog lamp missing (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear tyre cracking in tread

Offside Rear tyre cracking in tread

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear tyre cracking in tread

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear tyre cracking in tread

headlamp deflectors fitted

nearside rear, front axle tyre perishing

offside rear outer reflector damaged/missing

offside rear, front axle tyre worn on outer edge and perished

temporary fuel cap fitted

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm rear 215/75/16c (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Rear Tyre tread depth below requirements of 1.6mm rear (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

exhaust tail pipe bent/damaged

Headlamp masks/converters fitted

Front Brake pad(s) wearing thin (3.5.1g)