MOT Status
ExpiredMileage
32,237 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
offside wiper blade slightly split
Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Headlamp aim too low (1.8)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high and too far to the right. (1.8)
Offside Rear wheel bearing rough when rotated (2.6.1)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
offside rear brake flexi slightly twisted
offside wiper slightly split
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front brake juddering slightly (3.7.A.2b)
hand brake travel high
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Rear registration plate delaminated (6.3.1d)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside rear brake recording little or no effort (3.7.B.5a) DANGEROUS
Offside rear brake recording little or no effort (3.7.B.5a) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Emissions not tested (7.0)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Kia Pride?
Based on 67,258 MOT tests across 11,368 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W612 PVU is a 2000 Kia Pride in Green with a 1,324cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 2000 Kia Pride models, the average MOT pass rate is 60.0% with a typical mileage of 45,858 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Pride fails its MOT is brake pipe excessively corroded, accounting for 9,245 recorded failures. If you're considering buying W612 PVU, it's worth having these areas checked by a mechanic before committing.
The Kia Pride typically stays on UK roads for around 35 years. At 26 years old, this Kia Pride is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W612 PVU?
You can check the full history of W612 PVU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W612 PVU registered?
W612 PVU is a 2000 Kia Pride, first registered on 28 March 2000.
Is W612 PVU safe to buy?
The MOT history for W612 PVU shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W612 PVU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W612 PVU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.