2000 Honda Shuttle

Front Exhaust has a minor leak of exhaust gases Exhaust system deteriorated throughout (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened Sub-frame and associated components (5.3.3 (b) (i))

Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Suspension arm inner bush (5.3.4 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Suspension arm inner bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened Sub-Frame and associated components (5.3.3 (b) (i))

Exhaust Carbon monoxide (CO) emissions requirements only just met

Exhaust has a minor leak of exhaust gases Exhaust system deteriorated throughout (6.1.2 (a))

Exhaust system deteriorated throughout

Front Sub-frame corroded but not seriously weakened Front sub-frame and associated components corroded (5.3.3 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Upper suspension arm inner bush, Both lower suspension arm bushes and trailing arm bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Upper suspension arm inner bush, Both lower suspension arm bushes and trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened Rear sub-frame and associated components corroded (5.3.3 (b) (i))

Unable to fully inspect outer sills due to protective covers

Exhaust Carbon monoxide (CO) emissions requirements only just met

Exhaust has a minor leak of exhaust gases Exhaust system deteriorated throughout (6.1.2 (a))

Exhaust system deteriorated throughout

Front Sub-frame corroded but not seriously weakened Front sub-frame and associated components corroded (5.3.3 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Upper suspension arm inner bush, Both lower suspension arm bushes and trailing arm bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Upper suspension arm inner bush, Both lower suspension arm bushes and trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis - Surface corrosion throughout (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened Rear sub-frame and associated components corroded (5.3.3 (b) (i))

Unable to fully inspect outer sills due to protective covers

Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn outer edge, not full depth tread (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn outer edge, not full depth tread (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play rubber bushes heavily perished (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play rubber bushes heavily perished (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Lower Suspension component ball joint excessively worn ball joint (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Various suspension bushes perished and have slight movement

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Various suspension bushes perished and have slight movement

Brake pipe corroded, covered in grease or other material both rear and both front to rear (1.1.11 (c))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

front to rear brake pipes and fuel pipes behind plastic cover preventing inspection

Exhaust system corroded but not leaking gases

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt upper ball joint (2.4.G.2)

Offside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt upper ball joint (2.4.G.2)

Rear coil spring corroded Both rear springs (2.4.C.1b)

Battery insecure (1.9.1)

Exhaust system corroded but not leaking gases

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt upper ball joint (2.4.G.2)

Offside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt upper ball joint (2.4.G.2)

Rear coil spring corroded Both rear springs (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)