2000 Honda Accord

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick both side (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen wiper blade defective (3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen wiper blade defective (3.4 (b) (i))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine warning light on

exhaust back box joint corroded/worn

Offside Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine warning light on

exhaust back box joint corroded/worn

Fuel cap/sealing device missing (7.2.4a)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

front bumper insecure

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear All position lamps not working (1.1.A.3b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

e.m.l.on

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp insecure (1.7.3)

Offside Windscreen wiper blade insecure (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Engine covers fitted obscuring some components in the engine bay

Nail in nearside front tyre

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Under-trays fitted obscuring some underside components

all tyres valves split/perishing

both rear tyres getting low on inner edges

engine management light illuminated

fuel pipes corroding

n/s windscreen scratched

rear seats and belts not tested

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Side repeater incorrect colour (1.4.A.2f)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Side repeater incorrect colour (1.4.A.2f)

Nail in nearside front tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

EML stays on

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Anti-roll bar linkage missing (2.4.G.1)

Offside Headlamp aim too high (1.8)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

EML stays on

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Nearside Front front brake application uneven (3.7.B.2) DANGEROUS

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

engine management light on

o/s rear drop link s/wear

front grille missing

n/s/f dip beam on limit

Nearside Headlamp not working on dipped beam (1.7.5a)

Front registration plate deteriorated (6.3.1d)

Nearside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear registration plate deteriorated (6.3.1d)