2000 Toyota Yaris

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill section (7.1.1 (a) (i))

Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill section (7.1.1 (a) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill as marked (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill as marked (7.1.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases back box pipe (7.1.2)

dry and scaly advise to wax oil

registration plate deteriorated but not likely to be misread front and rear (6.3.1d)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

engine management light on

exhaust mounting bracket broken

Offside Rear Shock absorber has a light misting of oil (2.7.3)

engine management light on

exhaust mounting bracket broken

Brake pipe slightly corroded (3.6.B.2c)

EML on

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake lever has little reserve travel (3.1.6b)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Brake pipe slightly corroded (3.6.B.2c)

EML on

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake lever has little reserve travel (3.1.6b)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

engine man light on

Nearside Stop lamp not working (1.2.1b)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

engine man light on

management light on

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

management light on

Advise engine lite on

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)