2000 Peugeot Boxer

Emissions not tested Due to exhaust blow (7.3.A.1)

Exhaust has a major leak of exhaust gases Centre box (7.1.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Sidewall (4.1.D.1a)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded Floor (5.2.6)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill x2 holes. (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring area (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded Jacking point (5.2.6)

Offside Inner Seat belt anchorage prescribed area is excessively corroded Sill (5.2.6)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)

Steering system excessively tight Top mounts worn (2.2.D.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Front bush (2.4.G.2) DANGEROUS

Central Rear Brake pipe slightly corroded Inner & outer (3.6.B.2c)

Central Rear engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Front brake disc worn, pitted or scored, but not seriously weakened Both sides (3.5.1i)

Front cross member corroded

Hole osf inner wing, advise repair

Nearside Front Brake hose insecure

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch (2.4.A.3)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit 2mm bald on outer edge (4.1.E.1)

Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Outside prescribed area, advise repair (5.2.6)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Tyre perished

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Inner Play in steering rack inner joint(s) ()

Offside Front Inner Play in steering rack inner joint(s) ()

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

exhaust mounting rubber missing

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp not working (1.3.2b)

Steering system excessively tight (2.2.D.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

exhaust mounting rubber missing

Offside Front Ball joint has slight play (2.2.B.1f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

nearside rear shock absorber dust cover missing

Nearside Front Ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Front Ball joint has slight play (2.2.B.1f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nearside rear shock absorber dust cover missing

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp not working (1.3.2b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Child seat fitted not allowing full inspection of adult belt

Items removed from driver's view prior to test

Nearside rear shock absorber dust cover missing

Offside Rear wheel bearing has slight play (2.6.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

centre exhaust mountings deteriorated

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

Seat belt locking mechanism does not secure or release (5.2.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

centre exhaust mountings deteriorated

Inner sills corroded

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Inner Front Brake pipe slightly corroded (3.6.B.2c)

Rear Shock absorber has slight external damage to the casing (2.7.2a)

o/s/r & n/s/r & o/s/f tyres cracking in walls