2000 BMW 3 Series

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside front brake binding (3.7.B.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Air Bag Warning Light Stays on

Both Front Tyres Wearing On Inside Edges

Brake Pad Warning Light Stays On

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Parking brake lever has little reserve travel (3.1.6b)

Exhaust system not adequately supported (7.1.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Both front to rear metal brake pipes starting to rust at rear.

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

BOTH FRONT TO REAR METAL BRAKE PIPES STARTING TO RUST AT THE REAR.

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)