2000 Nissan Serena

Central Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Offside Rear Other passenger door catch deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mountain areas (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Outer Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mountain areas (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure 205/50zr17 (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge 205/50zr17 (5.2.3 (e))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Nail in tyre ()

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

brake waring light on

Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

under body corroded

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Brake pipe excessively corroded pipe from load compensator valve (3.6.B.2c)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

rear chassis & rear inner sills corroding

rear leaf spring bushes worn

Fuel system component leaking (7.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

rear brake application uneven (3.7.B.2)

Front Leaf spring has slight wear in an anchor pin and/or bush (2.4.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

rear chassis corroding

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

rear exhaust rubber mount split

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

rear exhaust rubber mount split

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

o/s/r brake slightly binding

rear chassis slight corrosion

Brake pipe inadequately clipped (3.6.B.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Brake pipe leaking (3.6.A.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too low (1.8)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake lever insecure (3.1.3b)

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

o/s/r brake slightly binding

rear chassis slight corrosion

Items removed from driver's view prior to test

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Passenger seat(s) missing at time of test

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

Items removed from driver's view prior to test

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Passenger seat(s) missing at time of test

clutch slave cylinder hose leaking

reverse light not working

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear exhaust rubber deteriated

steering rack rubber bushes are slightly worn

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust mounting missing (7.1.1b)

Steering rack insecure (2.2.B.1a)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Front Brake hose slightly deteriorated (3.6.B.4d)

slight wear in steering rack †

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)