2000 Peugeot Boxer

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked in yellow (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front step corroding

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security engine mount area corroded (6.2.2 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security cross member underbody (6.2.2 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced general underbody corrosion (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill underbody corroded (6.2.2 (d) (i))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security cross member underbody (6.2.2 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced general underbody corrosion (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material trans axle (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

corrosion on both rear shock absorbers

corrosion on suspension components

slight corrosion on all front brake hose flexi ferrulles

slight corrosion on exhaust

slight corrosion on rear spring hangers

Body has slight corrosion (6.1.B.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Upper Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Upper Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear wheel bearing has slight play (2.6.2)

Vehicle structure has slight corrosion (6.1.B.2)

all rear spring hangers corroded

corrosion on exhaust / exhaust mountings and rubber mountings cracking(deteriorated)

corrosion on suspension components

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom of a pillar (6.1.B.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)

Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing (6.1.B.2)

Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis seam (6.1.B.2)

Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing (6.1.B.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point (6.1.B.2)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Brake pipe leaking (3.6.A.1)

Nearside Rear Mechanical brake component has restricted free movement binding (3.5.1k)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom of a pillar (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)

Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing (6.1.B.2)

Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi leg in engine bay (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point (6.1.B.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Body has slight corrosion (6.1.B.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Upper Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Upper Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear wheel bearing has slight play (2.6.2)

Vehicle structure has slight corrosion (6.1.B.2)

all rear spring hangers corroded

corrosion on exhaust / exhaust mountings and rubber mountings cracking(deteriorated)

corrosion on suspension components

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside front brake binding (3.7.B.1)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front front brake binding (3.7.B.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

front brake application uneven (3.7.B.2)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside front brake binding (3.7.B.1)