2000 Aprilia RS 50

Front Tyre worn close to the legal limit (4.1.3(i))

Front Tyre worn close to the legal limit (4.1.3(i))

Headlamp aim too low (1.6)

Front Direction indicators not working (1.5.1c)

Front Horn not working (1.7.3a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not working (1.7.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Riders seat insecure (6.2.1a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Stop lamp remains on when the brake is released (1.3.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not loud enough to be heard by another road user (1.7.3a)

Lower Rear mono-shock pivot excessively worn (2.4.B.4)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Registration plate delaminated (6.3.1.d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Upper Rear suspension bush has slight free play (2.4.A2a(i))

Wheel alignment slightly misaligned. (2.5.1)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake component has an inadequate repair (3.1.5)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Brake caliper(s) securing bolt(s) loose (3.2.A1j) DANGEROUS

Rear wheel spindle securing nut(s) loose (2.4.A.2b) DANGEROUS

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

rear tyre pressure low

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too low (1.6)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Outer Lower Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Lower Brake component defective due to a deliberate modification which significantly reduces the original strength (3.1.5)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Wheel alignment incorrect which adversely affects the handling (2.5.1) DANGEROUS

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings have slight free play (2.3.5b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear suspension bush has slight free play (2.4.A2a(i))

r/h rear chain adjuster block not touching the bolt

rear tyre pressure low