2000 Fiat Ducato

Brake prescribed area is corroded but not considered excessive inner wing next to brake pipe mounting, both sides (1.1.21 (e) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower step (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Lower Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Wheel bearing has slight play both sides (5.1.3 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower step, marked with chalk (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab, marked with chalk (6.1.1 (c) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point, marked with chalk (6.1.1 (c) (i))

Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg, marked with chalk (6.1.1 (c) (i))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Towbar component excessively corroded mounting brackets, marked with chalk (6.1.6 (a))

Exhaust mounting defective rubbers perished (6.1.2 (a))

Front Brake prescribed area is corroded but not considered excessive inner wing next to brake pipe mounting, both sides (1.1.21 (e) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower step (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Lower Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Wheel bearing has slight play both sides (5.1.3 (a) (i))

Exhaust mounting defective Rubbers cracking/split (6.1.2 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Shock absorbers has a slightly worn bush Both rear lower (5.3.2 (c))

Wheel bearing has slight play Both rear (5.1.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust mounting defective Rubbers cracking/split (6.1.2 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Shock absorbers has a slightly worn bush Both rear lower (5.3.2 (c))

Wheel bearing has slight play Both rear (5.1.3 (a) (i))

Emissions unable to be completed (8.2.2.2 (e))

Exhaust emissions likely to be affected by an exhaust leak exhaust broken (8.2.1.1 (b))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill to jacking point marked in yellow (5.3.6 (a) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing marked in yellow (6.2.2 (d) (i))

Offside Front Brake pipe excessively corroded both marked in yellow (1.1.11 (c))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill, arch and jacking point marked in yellow (5.3.6 (a) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing and inner wheel arch near strut top marked in yellow (6.2.2 (d) (i))

Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Position lamp with a multiple light source up to 1/2 not functioning Rear side lights (4.2.1 (a) (i))

Shock absorbers has a slightly worn bush Both rear lower (5.3.2 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point area (6.1.1 (c) (i))

Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced front cross brace mount area (6.1.1 (c) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Front Headlamp aim too low both sides (4.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point area (6.1.1 (c) (i))

Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced front cross brace mount area (6.1.1 (c) (i))

Offside Front Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Front Lower Cross-member excessively corroded, Radiator insecure

Front Lower Subframe mounting prescribed area is corroded but not considered excessive Offside and Nearside inner sills (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Lower Shock absorbers has a slightly worn bush Offside and Nearside (5.3.2 (c))

Spare tyre defective ()

Nearside Front Upper Outline marker lamp not working (4.2.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Lower Cross-member excessively corroded, Radiator insecure

Front Lower Subframe mounting prescribed area is corroded but not considered excessive Offside and Nearside inner sills (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Lower Shock absorbers has a slightly worn bush Offside and Nearside (5.3.2 (c))

Small cracks in offside front tyre outer side wall

Brakes imbalanced across an axle (3.7.B.5b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Minor corrosion started under body

Small cracks in offside front tyre outer side wall

exhaust slightly deteriorated

cracking on osf tyre side wall cracking on nsr tyre side wall

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Stop lamp not working (1.2.1b)

Offside Rear wheel bearing has excessive play (2.6.2)

Offside Stop lamp not working (1.2.1b)

Offside Front wheel bearing has slight play (2.5.A.3c)

slight perishing on n/s/r n/s/f ando/s/f tyres

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front front brake juddering slightly (3.7.A.2b)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front front brake juddering slightly (3.7.A.2b)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

slight perishing on all 4 tyres