2000 Aprilia RS 50

Horn, poor effort

Exhaust system insecure (6.1.2 (a))

Fuel tank insecure (6.1.3 (a) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front tyre flat and badly perished.

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

All fairings insecure.

Front Mudguard insecure ()

Front tyre slight perishing

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

various fairings loose various places

Front Brake lever insecure (1.1.2 (e) (i))

Front Brake master cylinder insecure (1.1.10 (c))

Rear Tyre fouling another component fouling brake hose (5.2.3 (f))

Front tyre slight perishing

Mudguard insecure front and rear ()

Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Position lamp insecure (4.2.1 (c) (i))

Rear Rear reflector insecure (4.8.1 (b) (i))

Rear Registration plate slightly loose (0.1 (a))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

various fairings loose various places

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Tyre designed for front wheel use fitted to the rear wheel (5.2.3 (a))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Stop lamp not working front brake lever (4.3.1 (a) (ii))

Front Inner Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

wiring hanging loose under head light

Front wheel bearings are excessively rough (2.3.5b)

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Headlamp aim too low (1.6)

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Fuel cap mounting flange/sealing method defective (7.2.2c)

Front Tyre worn close to the legal limit (4.1.3(i))