2000 Honda CB600 Hornet

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Footrest insecure (6.2.1a)

Rear Brake disc(s) is excessively distorted (3.2.A1m)

Registration plate background overprinted or shadowed with text (6.3.1e)

Clutch lever bent (6.2.1g)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Front wheel bearings have slight free play (2.3.5b)

Handlebar Slightly Bent

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar deformed (2.1.1b)

Nearside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Rear Footrest missing (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

exhaust heat sheild loose

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

heat sheild loose

Clutch lever bent so it cannot be readily operated. (6.2.1g)

Nearside Rear Direction indicator insecure (1.5.3b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

heat sheild loose

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Direction indicator damaged and function impaired (1.5.3a)

Offside Front Direction indicator not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Handlebar deformed (2.1.1b)

Headlamp aim too low (1.6)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

low air presure in front tyre