2000 Honda Accord

Brake pipe corroded, covered in grease or other material back to front at front (1.1.11 (c))

rear cross member behind bumper corroded to excess

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and inner sill (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material back to front at front (1.1.11 (c))

rear cross member behind bumper corroded to excess

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassie (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Headlamp aim projected beam image is obviously incorrect no beam pattern (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at jacking point (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassie (6.1.1 (c) (i))

Anti-roll bar pin or bush worn but not resulting in excessive movement rear D bushes (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material and both front to rears front sections (1.1.11 (c))

Power steering component has slight seepage from a component both steering rack boots damp/deteriorated (2.1.5 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Anti-roll bar pin or bush worn but not resulting in excessive movement rear D bushes (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material and both front to rears front sections (1.1.11 (c))

Power steering component has slight seepage from a component both steering rack boots damp/deteriorated (2.1.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both wearing on edges (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

both rear tyres wearing on edges

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

both rear tyres wearing on edges

both rear tyres worn slightly on edges

Nearside Rear Suspension component mounting prescribed area is excessively corroded near jacking point (2.4.A.3)

both rear tyres worn slightly on edges

both rear tyres starting to crack in tread

Direction indicator incorrect colour both wing repeaters (1.4.A.2f)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

both rear tyres starting to crack in tread

Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside and offside front to rear brake pipes corroded.

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc slightly scored (3.5.1h)