2000 Toyota Celica

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge On 1.6mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge On 1.6mm (5.2.3 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output lens foggy (4.1.4 (b))

Nearside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output lens foggy (4.1.4 (b))

Offside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Front Suspension arm corroded but not seriously weakened both wishbones (5.3.3 (b) (i))

Nearside Front Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

fuel pipes on tank corroded

fuel tank filler pipe corroded

Front All position lamps light intensity significantly reduced both (4.2.3 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Suspension arm corroded but not seriously weakened both wishbones (5.3.3 (b) (i))

Nearside Front Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases tail box pin holed (6.1.2 (a))

fuel pipes on tank corroded

fuel tank filler pipe corroded

Parking brake lever has little reserve travel (3.1.6b)

both rear brakes are slightly binding

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

offside rear tyre starting to perish

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Road wheel distorted (4.2.A.1a)

Nearside Rear Road wheel distorted (4.2.A.1a)

Offside Front Headlamp aim too low (1.8)

Offside Rear Road wheel distorted (4.2.A.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

rear discs corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

front discs worn and scored

rear discs corroded

Front Brake pad(s) wearing thin (3.5.1g)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Registration plate lamp not working (1.1.C.1d)

front wiper blades smear slightly

n/s dip beam slightly blurred

some corrosion on front brake discs

Front Brake pad(s) wearing thin (3.5.1g)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front wiper blades smear slightly

n/s dip beam slightly blurred

some corrosion on front brake discs

Both Front Brake-Discs rusted on Inner Brake surfaces.Both Rear Brake-Discs rusted on Brake surfaces.

Nearside Headlamp aim too low (1.8)

Both Front Brake-Discs rusted on Inner Brake surfaces.Both Rear Brake-Discs rusted on Brake surfaces.

Offside Side repeater not working (1.4.A.2c)

Offside Front Headlamp not working on dipped beam (1.7.5a)