2000 Jaguar Xj

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front floor, corroded and holed close to prescribed area

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive step/outer sill area (7.1.1 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front floor, corroded and holed close to prescribed area

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive step/outer sill area (7.1.1 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Brake hose slightly damaged (1.1.12 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive inner arch area (5.3.6 (a) (i))

Offside Front Brake hose slightly damaged (1.1.12 (b) (i))

Offside Front floor corroded and holed close to suspension prescribed area

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

nearside and offside floor to sills slightly corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Sub-frame attachment bracket/mounting fractured corroded and holed (5.3.3 (b) (ii)) DANGEROUS

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Brake hose slightly damaged (1.1.12 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive inner arch area (5.3.6 (a) (i))

Offside Front Brake hose slightly damaged (1.1.12 (b) (i))

Offside Front floor corroded and holed close to suspension prescribed area

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

nearside and offside floor to sills slightly corroded

Front Suspension arm corroded but not seriously weakened both sides (2.4.G.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front floor corroded and holed in non prescribed area

Offside Play in steering rack inner joint(s) ()

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive step/sill (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

nearside and offside floor to sills slightly corroded

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded end of sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Suspension component mounting prescribed area is excessively corroded end of sill (2.4.A.3)

Front Suspension arm corroded but not seriously weakened both sides (2.4.G.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front floor corroded and holed in non prescribed area

Offside Play in steering rack inner joint(s) ()

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive step/sill (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

nearside and offside floor to sills slightly corroded

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill area (2.4.A.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front floor corroded and holed in non prescribed area

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive step/sill area (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill area (2.4.A.3)

both front tyres worn smooth on inner edges (raised tread pattern)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front Suspension component mounting prescribed area is excessively corroded floor to sill area (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded floor to sill area (2.4.A.3)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill area (2.4.A.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front floor corroded and holed in non prescribed area

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive step/sill area (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill area (2.4.A.3)

both front tyres worn smooth on inner edges (raised tread pattern)

Nearside Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)

Offside Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)

Rear Brake pad(s) wearing thin (3.5.1g)

corrosion front inner sills

nearside rear tyre worn low on inner edge very near limits

offside rear tyre worn on inner edge

slight front brake judder

Vehicle structure has slight corrosion (6.1.B.2)

Horn not working (1.6.2a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

n/s wing mirror slightly loose

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both rear tyres close to wear bars

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)