2000 Yamaha R6

Clutch lever bent (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Footrest slightly loose Shortened (6.2.12 (a))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Footpeg short

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

Wheel alignment slightly misaligned Steering slightly twisted (2.4 (a))

Exhaust silencer insecure Clamp missing (8.1.1 (b) (i))

Front Brake excessively binding (1.2.1 (f))

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Footpeg short

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

Wheel alignment slightly misaligned Steering slightly twisted (2.4 (a))

Offside Front Footrest short

Front Tyre is perishing between tread

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Exhaust slightly loose (6.1.2 (a))

Front Tyre is perishing between tread

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Front Footrest short

Offside Front Position lamp not working (4.2.1 (a))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Exhaust slightly loose (6.1.2 (a))

Nearside Front Footrest Short

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Wheel alignment slightly misaligned. (2.5.1)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Registration plate deteriorated (6.3.1d)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Nearside Front Footrest Short

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Wheel alignment slightly misaligned. (2.5.1)

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Hydraulic brake control feels spongy (3.1.4a)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))