2000 Peugeot 106

Front Brake pipe excessively corroded to rear (1.1.11 (c))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords both (5.2.3 (d) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear tyres cracking in tread both

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Axle Corroded

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Horn not working (7.7 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Rear Axle Corroded

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Both Rears (1.2.1 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases Back Box Join (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Both Rears (1.2.1 (c))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Parking brake lever insecure (3.1.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Parking brake lever has little reserve travel (3.1.6b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Exhaust system not adequately supported (7.1.1)

Centre Rear Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Power steering ram(s) leaking from a failed component (2.3.3b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Fuel system component insecure (7.2.1)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)