2000 Rover 416

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Excessive noise from the clutch bearing

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Coil spring corroded both (5.3.1 (b) (i))

Front washer weak both

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

slight stone chips

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch corroded and holed (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded and holed (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch corroded and holed (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded and holed (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front washer weak both

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

slight stone chips

Front Coil spring corroded both (5.3.1 (b) (i))

Offside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills holed (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills holed (6.2.2 (d) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Tyre worn close to the legal limit 2.7mm (4.1.E.1)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor pan by jacking point (2.4.A.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm 1.2mm (4.1.E.1)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor pan by jacking point (2.4.A.3)

Offside Front Tyre worn close to the legal limit 2.7mm (4.1.E.1)

Rear Direction indicator slightly discoloured both (1.4.A.2f)

Offside Rear Tyre tread depth below requirements of 1.6mm fitted spare wheel (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced across an axle (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

Rear Exhaust has a major leak of exhaust gases (7.1.2)