2000 Mazda E Series

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked with yellow chalk (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))

general condition to underside corroded but structurally sound

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

front subframe/suspension components corroded

rear subframe/ suspension components corroded

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch - chalked (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

front subframe/suspension components corroded

rear subframe/ suspension components corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front inner wheel arch corroded/holed - not within structual point

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Body component corroded and likely to cause injury outer sill (6.2.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))

Front cross member corroded and hold but not effective to the suspension

underside corroded

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer (7.1.1 (a) (i))

Front cross member corroded and hold but not effective to the suspension

underside corroded

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

all rear suspension has surface corrosion

both front outriggers have corrosion

part of exhaust has been temp repaired but doesnt effect emissions

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

all rear suspension has surface corrosion

both front outriggers have corrosion

part of exhaust has been temp repaired but doesnt effect emissions

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leaking excessively from engine (8.4.1 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

both inner sills slightly corroded

front chassis outriggers slightly corroded

slight corrosion on both rear outer sills

slight corrosion on underside

Front suspension ball joint dust cover damaged, but preventing the ingress of dirt both (2.4.G.2)

Oil leak ()

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.2.C.1c)

Vehicle structure has slight corrosion (6.1.B.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush (2.4.G.2)

Vehicle structure has slight corrosion (6.1.B.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

All tyres have cracking to treads

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nearside rear tyre beginning to perish / split

offside rear tyre beginning to perish / split

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

nearside rear tyre beginning to perish / split

offside rear tyre beginning to perish / split

offside wiper smearing

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Seat belt locking mechanism does not secure or release (5.2.5a)

Statutory seat belt missing (5.1.1)

Statutory seat belt missing (5.1.1)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Body has slight corrosion (6.1.B.2)

Front brake disc slightly pitted (3.5.1h)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)