2000 Toyota MR2

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Headlamp incorrect colour (1.7.5b)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

undertray

undertrays

Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Rear Parking brake lever, pawl mechanism pivot(s) retaining device insecure (3.1.4b)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Brake cable modified but not seriously weakened (3.5.1n)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Brake cable modified but not seriously weakened (3.5.1n)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

Engine management light illuminated

Offside headlamp lens slightly deteriorated

Wipers streaky

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Engine management light illuminated

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside headlamp lens slightly deteriorated

Wipers streaky

discs worn

engine warning light on

Front registration plate character(s) sloping (6.3.4b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Rear registration plate character(s) sloping (6.3.4b)

discs worn

engine warning light on

Locking pin o/s rear missing

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake binding (3.7.B.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Locking pin o/s rear missing

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

O/S headlamp misted.

O/S parking brake less effecient than n/s.

Surface corrosion noted to both front coil springs.

Front registration plate font not substantially similar to the prescribed font (6.3.4d)

Rear registration plate font not substantially similar to the prescribed font (6.3.4d)

O/S headlamp misted.

O/S parking brake less effecient than n/s.

Surface corrosion noted to both front coil springs.

xxxxxxxxxx

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too low (1.8)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear pads low