2000 Toyota Yaris

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all greased (1.1.11 (c))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

subframe and wishbones corroded

Brake pipe corroded, covered in grease or other material various (1.1.11 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill hole (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill hole (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill hole (7.1.1 (a) (i))

Brake pipe corroded, covered in grease or other material various (1.1.11 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front both headlamps deteriorated

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front both headlamps deteriorated

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

engine light on

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner/outer sill (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner/outer sill (7.1.1 (a) (i))

corrosion to all underside components

Central Exhaust system not adequately supported (7.1.1)

Emissions not tested (7.3.A.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater not working (1.4.A.2c)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Front wheel slightly tight to turn

Offside Front wheel slightly tight to turn

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

front brakes starting to bind

Fuel cap/sealing device sealing washer missing (7.2.4c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

n/s wiper blade split

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)