2000 Honda Accord

corosion on springs

corrosion o other brakepipes

corrosion on fuel pipes

discs and apds staretd to wear

front and rear bumper insecure

slight oil leak

tyres started to wear

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp insecure (1.7.3)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Side repeater incorrect colour (1.4.A.2f)

Rear brake disc excessively pitted (3.5.1h)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Child seat fitted not allowing full inspection of adult belt

Front bumper insecure

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

offside front inner constant velocity joint gaiter split

offside rear door not opening

offside rear tyre slight perish

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight corrosion on brake discs

Brake pipe excessively corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Direction indicators not working (1.4.A.2c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp not in good working order (not working) (1.2.4a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Steering rack gaiter split (2.2.D.2d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Stop lamp not working (1.2.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

been in accident

corrosion on discs

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Headlamp aim too low (1.8)

Nearside Front suspension has a suspension upper ball joint securing nut not locked (2.5.B.1a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Rear rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pedal spongy (3.3.B.1b)

Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Front Front suspension locking device missing (2.5.A.4)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)