2000 Peugeot 106

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Horn not working (7.7 (a) (ii))

Offside Brake pipe excessively corroded Front to rear (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Lower effort from offside (1.2.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm 165/70-13 (5.2.3 (e))

Horn not working (7.7 (a) (ii))

Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Clip split (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sills/front lower of rear wheel arch (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Lower effort from offside (1.2.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm 165/70-13 (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm 165/70-13 (5.2.3 (e))

Power steering pump has slight seepage (2.1.5 (a))

Horn not working (7.7 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm 165/70-13 (5.2.3 (e))

Power steering pump has slight seepage (2.1.5 (a))

Horn not working (1.6.2a)

Nearside Front Inner Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside rear brake excessively fluctuating (3.7.B.3)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)