MOT Status
ExpiredMileage
132,604 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Horn not working (7.7 (a))
Nearside Inner Seat belt anchorage prescribed area is inadequately repaired inner sill holed and patch not continuously seam welded (7.1.1 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch from outer sill (7.1.1 (a) (i))
Emissions not tested (8.2.1.2 (d))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sill corners (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
sill covers fitted preventing full inspection
Offside Rear Service brake excessively binding also wheel bearing not checked (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
sill covers fitted preventing full inspection
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
sill covers fitted preventing full inspection
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
sill covers fitted preventing full inspection
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened & rear discs on inner faces (1.1.14 (a) (ii))
Offside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting repair covered in underseal both sides (5.3.6 (a) (i))
Horn not working (7.7 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Under sill (7.1.1 (a) (i))
Offside Brake pipe likely to become detached or damaged Front to rear hose (1.1.11 (d) (ii))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension rod ball joint dust cover missing (5.3.4 (b) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Under sill (7.1.1 (a) (i))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear inner wheel arch (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
All brake discs corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Brake pipe corroded, covered in grease or other material Front to hose (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Horn not working (1.6.2a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Rear shock absorbers heavily corroded
Horn not working (1.6.2a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Seat belt anchorage prescribed area is fractured inner sill (5.2.6)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front front brake binding (3.7.B.1)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Seat belt anchorage prescribed area is fractured inner sill (5.2.6)
Offside rear brake binding (3.7.B.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear shock absorbers heavily corroded
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Direction indicators not working (1.4.A.2c)
Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside rear brake binding (3.7.B.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Tyre worn close to the legal limit (4.1.E.1)
Front brakes have only just passed balance test (24%) and may need further attention.
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Registration plate lamp not working (1.1.5c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.5c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Jaguar S-type?
Based on 942,176 MOT tests across 62,116 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W809 UGU is a 2000 Jaguar S-type in Blue with a 2,967cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 55.6%.
Across all 2000 Jaguar S-type models, the average MOT pass rate is 71.4% with a typical mileage of 84,695 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Jaguar S-type fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 43,168 recorded failures. If you're considering buying W809 UGU, it's worth having these areas checked by a mechanic before committing.
The Jaguar S-type typically stays on UK roads for around 27 years. At 26 years old, this Jaguar S-type is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W809 UGU?
You can check the full history of W809 UGU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W809 UGU registered?
W809 UGU is a 2000 Jaguar S-type, first registered on 1 March 2000.
Is W809 UGU safe to buy?
The MOT history for W809 UGU shows 27 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W809 UGU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W809 UGU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.