2000 Kawasaki ZRX1100

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Slight oil leak

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

slight oil leak

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Suspension component modified so the suspension is inoperative fork travel insufficient (5.3.3 (c) (ii)) DANGEROUS

Chain guard missing ()

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Suspension corroded but not seriously weakened front fork chrome (5.3.3 (b) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Suspension component modified so the suspension is inoperative fork travel insufficient (5.3.3 (c) (ii)) DANGEROUS

Chain guard missing ()

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Suspension corroded but not seriously weakened front fork chrome (5.3.3 (b) (i))

Rear Mudguard insecure ()

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit 2mm (5.2.3 (e))

Exhaust system insecure FOULING ON SUSPENSION (6.1.2 (a))

Front Position lamp not working (4.2.1 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake component insecure BRAKE RIACTION ARM MISSING LOCKING PIN (1.1.21 (c))

Registration plate insecure (0.1 (a))

Exhaust noisy (8.1.1 (a))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Offside Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Brake hose slightly damaged (1.1.12 (b) (i))

Rear Tyre worn close to the legal limit 2mm (5.2.3 (e))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

REAR TYRE HAS NAIL/SCREW IN IT

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

REAR TYRE HAS NAIL/SCREW IN IT

Drive chain slightly loose (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust excessively deteriorated (7.1.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Drive chain slightly loose (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Brake disc(s) excessively scored (3.2.A1l) DANGEROUS

Rear Brake disc(s) excessively worn (3.2.A1l) DANGEROUS

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Rear Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Rear Direction indicator deteriorated but function not impaired (1.5.3a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Rear reflector on motorcycle missing (1.4.1)

Rear Brake pedal has inadequate reserve travel (3.1.3b) DANGEROUS

Rear Brake pipe excessively damaged (3.2.B2a) DANGEROUS

Rear wheel rotation likely to be impeded (6.2.1b) DANGEROUS

Front Front wheel bearings are slightly rough (2.3.5b)

Front Front wheel bearings have slight free play (2.3.5b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)