2000 Honda Accord

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Headlamp aim not tested (4.1.2 (b))

Headlamp lens seriously defective BOTH (4.1.1 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

EML light on

Front Upper Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))

Nearside Obligatory mirror slightly damaged cracked (3.3 (b) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Bumper damaged

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing Tyre has perish cracks to sidewalls (5.2.3 (d) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

All direction indicators incorrect colour Front and rear indicator lamps (4.4.3 (a))

Engine MIL inoperative or indicates a malfunction Indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Side repeater incorrect colour Both sides repeater lamp (4.4.3 (a))

Headlamp lens seriously defective Both sides headlamp lens (4.1.1 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing Tyre has perish cracks to sidewalls (5.2.3 (d) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear tyre inner edge worn

Offside Rear tyre inner edge worn bad

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords both (5.2.3 (d) (i))

Front Exhaust silencer likely to become detached (8.1.1 (b) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear tyre inner edge worn

Offside Rear tyre inner edge worn bad

Rear Brake pad(s) wearing thin (3.5.1g)

Front cat heat shield insecure--------

Front Tyre worn close to the legal limit (4.1.E.1)

both front tyres uneven wear inner edges--bad----

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both rear tyres uneven wear inner edges;n/s/front is bad----

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

front number plate damaged--

rear tyres uneven wear inner edges--

Front numberplate damaged

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front numberplate damaged

Front discs lipped on edges.

Nearside Headlamp aim beam image too far to the right (1.6.B4)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Windscreen wiper blade deteriorated (8.2.2)