2000 Yamaha FZS600

Exhaust noisy (8.1.1 (a))

Front Brake excessively binding (1.2.1 (f))

Rear Brake caliper insecure (1.1.16 (c) (i))

Nearside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Horn sound not in accordance with requirements (7.7 (c))

Registration plate inscription illegible (0.1 (b))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

rear tyre squared off

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

Stop lamp not working (4.3.1 (a) (ii))

rear tyre squared off

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front pads worn

Very slight bind on front brake

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front pads worn

Offside Rear Direction indicators not working (1.5.1c)

Very slight bind on front brake

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

front tyre unevenly worn

rear tyre unevenly worn

nearside rear indicator loose but not insecure

Exhaust is leaking and excessively noisey (7.1.1b)

nearside rear indicator loose but not insecure

Front Tyre worn close to the legal limit (4.1.3(ii))

Inner Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

front tyre perished

front tyre unevenly worn