2000 Sym Shark

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

advise some body panels broken but secure

advise top panels secured with tape

general condition of bike is poor

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high (4.1.2 (a))

advise some body panels broken but secure

advise top panels secured with tape

general condition of bike is poor

Rear wheel bearings have slight free play recommend check (2.4.A.2c)

lighting switch, operation slightly erratic, recommend check

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

minor starting issue during test,, recommend check

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(i))

Steering movement slightly 'notchy' (2.2.1a)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake lever mounting insecure (3.1.2a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Steering movement slightly 'notchy' (2.2.1b)

Rear Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)