2000 Jaguar Xkr

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Brake pipe corroded, covered in grease or other material front and rear . (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Central Brake pipe slightly corroded (3.6.B.2c)

Nearside Inner Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded Offside front to rear (3.6.B.2c)

Front Front suspension has slight play in a lower suspension ball joint nearside and offside (2.5.B.1a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brake pipe slightly corroded Offside front to rear (3.6.B.2c)

Front Front suspension has slight play in a lower suspension ball joint nearside and offside (2.5.B.1a)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

offside + nearside rear suspension slight play

offside front floor surface corrosion

offside rear sill surface corrosion

Both front tyres are worn on the inner edges

Both rear tyres are wearing more on the inner edges

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Play in steering rack inner joint(s)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both front floor pans corroded.

Offside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both front floor pans corroded.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

N/S/F headlamp has condensation inside the lense

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Shock absorber has an excessively worn bush (2.7.4)

Offside Front Shock absorber has an excessively worn bush (2.7.4)

Parking brake lever ratchet mechanism is broken (3.1.5)

Parking brake: efficiency below requirements (3.7.C.1b)

N/S/F headlamp has condensation inside the lense

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

advise nail in tread of o/s/r tyre

both rear tyres wearing in centre treads monitor wear

front brake pads getting low monitor wear

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)