2000 Mercedes-benz Sl

Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear exhaust box corroded

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear exhaust box corroded

Exhaust corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust corroded

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear (5.3.6 (a) (i))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area repaired, but not inappropriately (2.4.A.3)

exhaust corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

under body slightly corroded

Brake pipe excessively corroded (3.6.B.2c)

Headlamp aim too low (1.8)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Power steering component(s) has slight seepage from a component (2.3.3b)

Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Suspension arm has excessive play in a pin/bearing (2.4.G.2)

Power steering component(s) has slight seepage from a component (2.3.3b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)