2000 Suzuki GZ125

Drive chain worn but not considered excessive with tight spots (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Brake cable has restricted free movement rear brake cable stiff in operation and partially seized, making pedal feel notchy and stiff. (1.1.15 (e))

Brake component insecure split pin missing from rear torque arm. (1.1.21 (c))

Drive chain horseshoe locking device incorrectly fitted fitted backwards (6.1.7 (j) (i))

Headlamp aim too low (4.1.2 (a))

Rear Position lamp not working (4.2.1 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Steering headbearing in such a condition that steering control is adversely affected steering very notchy (2.2.2 (f) (ii)) DANGEROUS

Drive chain worn but not considered excessive with tight spots (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front tyre has cracks to side walls but no cords showing at time of test

Wheel alignment slightly misaligned. (2.5.1)

Drive chain excessively loose (6.2.1d)

Rear Brake pedal cannot be applied smoothly (3.1.3d)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Floor brake test indicates a binding brake (3.3.C2c) DANGEROUS

Brake lining(s) close to minimum limit brake adjusted up near limit (3.2.A1f(i))

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front tyre has cracks to side walls but no cords showing at time of test

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain slightly loose (6.2.1d)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Rear position lamp damaged and function impaired (1.1.1b)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)