2000 Toyota Yaris

Emissions not tested holed around sensor (8.2.1.2 (d))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember corroded (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember corroded (6.1.1 (c) (i))

Front Headlamp lens slightly defective both sides cloudy/hazed (4.1.1 (b) (i))

Front Lower Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake load sensing valve linkage defective and function impaired linkage parts missing (1.1.17 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Windscreen washer not working (3.5 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake load sensing valve inoperative and ABS not fitted or inoperative linkage parts missing (1.1.17 (c) (ii)) DANGEROUS

Exhaust has a major leak of exhaust gases at rear joint/clamp (7.1.2)

Front Subframe mounting prescribed area is excessively corroded offside rear corner (2.4.A.3)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear rear brakes release unevenly (3.7.B.4) DANGEROUS

rear brake application uneven (3.7.B.2) DANGEROUS

Nearside Rear Brake pipe excessively corroded from flexy to w/cyl (3.6.B.2c)

Nearside Rear Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Brake pipe excessively corroded from flexy to l/sensing valve (3.6.B.2c)

Offside Rear Brake pipe excessively corroded from flexy to w/cyl (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside front tyre tread lowon outer section.