2000 Mercedes-benz Sprinter

Nearside Rear Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm both front (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Inner Play in steering rack inner joint(s) ()

Front both shocks weak

Nearside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Offside Front tyre at 2mm

Cab rust

Cab top lamp inop n/s

Front suspension has slight play in a lower suspension ball joint Both sides (2.5.B.1a)

Oil leaks

Suspension spring mounting prescribed area is corroded but not considered excessive Both rear (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

Vehicle structure has slight corrosion (6.1.B.2)

Wiper ends split

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Obligatory mirror seriously obscured affecting the rear view (8.1.2a)

Nearside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Service brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Oil leaks

Roof side marker lamp broken

Suspension spring mounting prescribed area is corroded but not considered excessive Both rear rear (2.4.A.3)

Vehicle structure has slight corrosion (6.1.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Coolant leak

N/s/r lamps damaged

Oil leak

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

door taped

n/s/f marker lamp missing

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Brake pipe slightly corroded (3.6.B.2c)

Coolant leak

N/s/r lamps damaged

Oil leak

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

door taped

n/s/f marker lamp missing

Oil leak

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Oil leak

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Direction indicators not working (1.4.A.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Inner Front position lamp(s) obscured but not more than 50% (1.1.A.3c)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Vehicle structure has slight corrosion (6.1.B.2)

injector leaking

Brake load sensing valve linkage seized (3.6.E.3)

Offside Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Anti-roll bar ball joint dust cover missing (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Inner Front position lamp(s) obscured but not more than 50% (1.1.A.3c)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Vehicle structure has slight corrosion (6.1.B.2)

injector leaking

both front disc rusty and pitted

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Lower Front suspension locking device missing (2.5.A.4)

Offside Rear rear brake grabbing slightly (3.7.A.5b)