2000 Yamaha SR125

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake rod insecure split pin locking device missing (1.1.15 (c))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Drive chain worn to excess (6.2.1e)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Roller brake test indicates a severely juddering brake (3.3.A1b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Registration plate delaminated (6.3.1.d)

Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Brake disc(s) slightly worn (3.2.A1l)

Chip in head lamp glass

Front brake lever

Front brake lever pivot worn

Rear number plate cracked

Side stand bolt worn

Drive chain worn to excess (6.2.1e)

Front Plate brake test indicates a binding brake (3.3.B1a)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Headlamp aim too high (1.6)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Wheel alignment slightly misaligned. (2.5.1)

advised brake noies on rollers

advised chip in headlamp

advised end snaped of front brake lever

advised exhaust corroded slight blow

advised fronk fork stantion rusty at top

advised front brake lever pivot bolt worn

advised plastic cover around clocks split

advised rear number plate cracked

advised side stand bolt worn

advised slight corrosion front discs

Front and rear tyres perished in tread and side walls

Rear suspension very hard

Stone chip in head lamp glass

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front and rear tyres perished in tread and side walls

Rear suspension very hard

Stone chip in head lamp glass

Drive chain excessively tight (6.2.1d)

Rear reflector on motorcycle missing (1.4.1)

Throttle operating incorrectly (6.2.1f)