2000 Rover Mini

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Body component damaged and likely to cause injury (6.2.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various (5.3.6 (a) (i))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides outer sills (5.3.6 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting area (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various (5.3.6 (a) (i))

Nearside Vehicle structure has slight corrosion sill (6.1.A.1)

Offside Vehicle structure has slight corrosion sill (6.1.A.1)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp insecure (1.3.2a)

Offside Rear fog lamp not working (1.3.2b)

Nearside Vehicle structure has slight corrosion sill (6.1.A.1)

Offside Vehicle structure has slight corrosion sill (6.1.A.1)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

corrosion under vehicle

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

rear brake application uneven (3.7.B.2)

Braking system leaking (3.6.A.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Rear reflector excessively damaged so that its function is impaired (1.5.1c)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

front no plate has water ingress

oil leaking from gear change oil seal

rear no plate has water ingress