2000 Honda C90

Front suspension assembly has slight free play between the sliding members (2.3.4)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Front Brake lever is damaged and the brake cannot be readily applied (3.1.3c)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Direction indicator damaged and function impaired (1.5.3a)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Rear Rear shock absorber insecurely mounted (2.4.A.3b)

Rear Brake locking device missing (3.2.A1e)

Registration plate deteriorated (6.3.1d)

Drive chain slightly loose (6.2.1d)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Steering linkage has slight free play (2.2.2)

Drive chain excessively loose (6.2.1d)

Floor brake test Neither brake control achieves an efficiency of 25% (3.3.C1b)

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Floor brake test indicates a sticking brake (3.3.C2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Offside Rear Rear shock absorber insecurely mounted (2.4.A.3b)

Position lamp switch faulty (1.1.4a)

Registration plate obscured (6.3.1d)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Brake pedal pivots slightly worn (3.1.3a)

Front Leg shield insecure but not likely to impede the steering (2.1.2e)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Front Wheel alignment incorrect which adversely affects the steering (2.5.1)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake locking device missing (3.2.A1e)

Riders seat insecure (6.2.1a)

Stop lamp affected by the operation of another lamp (1.3.2)

Rear Drive chain slightly loose (6.2.1d)