2000 Land Rover Discovery

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear Fuel system component leaking (6.1.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Upper Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing/floor (1.1.21 (e) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced centre (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre and front sill (7.1.1 (a) (i))

Brake performance not tested (1.2.1 (g))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Fuel pipe leaking (6.1.3 (b) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Inner Suspension component corroded but not seriously weakened sill (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement and offside trailing arms (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement and offside trailing arms (5.3.4 (a) (i))

Nearside Front Drag link end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Drag link end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement and offside trailing arms (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement and offside trailing arms (5.3.4 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

CENTER EXHAUST MOUNTING CORRODED

Front WIPER BLADES SLIGHTLY DETERIOATED

N/S & O/S CENTER BODY MOUNT CORRODED BUT NOT EXCESSIVE

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Stop lamp not working (1.2.1b)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

rear exhaust slightly deterioated

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

rear exhaust slightly deterioated

Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Fuel system component leaking (7.2.3)

Headlamp OK as presented at level 2

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front wipers split