MOT Status
ExpiredMileage
68,045 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Nearside Stop lamp not working (1.2.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all body panels damaged/corroded
o/s/f inner driveshaft gaitor split
windscreen damaged outside swept area
n/s/f inner driveshaft gaitor split
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Tyre fouling a part of the vehicle (4.1.D.2)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all body panels damaged/corroded
o/s/f inner driveshaft gaitor split
n/s/f inner driveshaft gaitor split
Engine/gearbox mounting(s) defective
Fuel pipe/s corroded
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Oil leak
drivers door damaged
front lower panel corroded
n/s door damaged
n/s/f headlamp aim high within limit
n/s/f inner driveshaft gaitor split
n/s/r o/s/r panels damaged and corroded
o/s/f headlamp slight damage
o/s/f inner driveshaft gaitor split
side sliding doors damaged and corroded
slight scoring to screen
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Engine/gearbox mounting(s) defective
Fuel pipe/s corroded
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Oil leak
drivers door damaged
front lower panel corroded
n/s door damaged
n/s/f headlamp aim high within limit
n/s/f inner driveshaft gaitor split
n/s/r o/s/r panels damaged and corroded
o/s/f headlamp slight damage
o/s/f inner driveshaft gaitor split
side sliding doors damaged and corroded
slight scoring to screen
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pipe slightly corroded (3.6.B.2c)
Fuel pipe/s corroded
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear brake disc slightly scored (3.5.1h)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc slightly scored (3.5.1h)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
driver door corroded catching on wing
n/s/f inner driveshaft gaitor split
o/s/f headlamp slight damage
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear fog lamp not working (1.3.2b)
Rear passenger door does not latch securely closed (6.2.B.1a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W947 ATW is a 2000 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 2000 Mercedes-benz Vito models, the average MOT pass rate is 62.9% with a typical mileage of 111,462 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying W947 ATW, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 26 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W947 ATW?
You can check the full history of W947 ATW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W947 ATW registered?
W947 ATW is a 2000 Mercedes-benz Vito, first registered on 17 August 2000.
Is W947 ATW safe to buy?
The MOT history for W947 ATW shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W947 ATW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W947 ATW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.